Network Parameters
Enter the following parameters for the entry then click OK:
•
MAC Address: Enter a valid MAC address.
•
Internal IP Address: The IP address of the internal device
NOTE: Ensure that the device with the Internal IP address has been added to the Authorized Subscribers table.
•
Internal Port: The port number of the internal device
•
External IP Address: The default is the IP address of the AP.
•
External Port: The port number on the external device.
•
Remote IP Address: This field is optional. Leave this field blank if you want to connect to the internal device
from any network work station.
•
Remote Port: This field is optional. Leave this field blank if you want to connect to the device from any
TCP/UDP port of a network work station.
•
Protocol: Select TCP or UDP.
89