To Install A Hard Drive - Sun Microsystems Ultra 27 Service Manual

Removing and Installing a Hard Drive
■
▼

To Install a Hard Drive

Power off the workstation using procedures in section,
1
page
Remove the side access panel as described in section,
2
page
Gently lay the system on its right side on a stable, nonslip surface.
3
If you are replacing a hard drive, see
4
Remove the new HD from its antistatic packaging.
5
Caution –
Push the plastic latch in the direction of the engraved arrow (away from the metal handle) until
6
the HD handle pops out.
40 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
If you removed a hard drive, and are not replacing it at this time, close the workstation as
described in the section,
30.
31.
Handle the HD with care. Dropping or jarring the HD can cause damage.
"Closing the Workstation and Preparing for Operation"on page
"To Remove a Hard Drive"on page
"To Power Off the Workstation"on
"To Remove the Left-Side Access Panel"on
38.
34.