9
C H A P T E R
Storage Devices
This chapter contains procedures for removing and installing storage devices. The
following is the list of storage devices.
Hard Disk Drive
The SPARCstation 20 system uses 535-Mbyte, 1.05-Gbyte, and 2.0-Gbyte
single-connector hard disk drives. Each disk drive connects to the SCSI backplane. A
handle on each single-connector drive helps to install the hard disk drive into the
SCSI backplane socket.
To remove and install a hard disk drive, proceed as follows.
Note – Do not remove the handle from the hard disk drive; it is part of the field
replaceable unit (FRU).
Removing a Hard Disk Drive
1. Remove power from the system.
See "Removing Power from the System" on page 45.
2. Remove the cover and attach the wrist strap.
See Chapter 7.
117