Sun Microsystems Ultra 27 Service Manual page 66

Removing and Installing PCIe Cards
Note –
Expansion Slots" on page
card that you are installing.
Power off the workstation using the procedure described in the section,
1
Workstation"on page
Remove the left-side access panel using the procedure described in the section,
2
Left-Side Access Panel"on page
Gently lay the system on its right side on a stable, nonslip surface.
3
Use a #2 screwdriver to remove the back panel bracket cover for the slot.
4
Position the card over the selected slot and ensure that the notch in the connector on the
5
motherboard aligns with the notch in the connector of the PCIe card.
Press down on the card until it is completely seated in the slot.
6
66 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
Refer to the service label on the inside of the access panel or the section,
108, to help you choose an empty card slot that is compatible with the
30.
31.
"PCIe and PCI
"To Power Off the
"To Remove the