Figure; Removing The System Fan - Sun Microsystems Ultra 27 Service Manual

Replacing the System Fan
Slide the fan assembly down to release the four hooks on the back of the bracket from the holes
7
in the chassis (see
Remove the fan from the chassis and note the orientation of the fan in the mounting bracket.
8
The fan is attached to a mounting bracket with four clips with the fan power cable nearest the
chassis mounting clips.
To remove the fan from the fan mounting bracket, release the four retaining clips and separate
9
the fan from the bracket.
To install the new fan in the mounting bracket, position the fan over the bracket with the
10
protective grill facing away from the bracket and the fan power cable positioned near the two
chassis retaining clips.
Line up the four corner pins in the bracket with the holes in the corners of the fan.
11
70 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A

Figure

3–24).

Removing the System Fan

FIGURE 3–24