To Remove A Hard Drive; Figure - Sun Microsystems Ultra 27 Service Manual

Removing and Installing a Hard Drive
▼

To Remove a Hard Drive

Note –
existing hard drive, proceed to
Power off the workstation as described in section,
1
Remove the side access panel as described in section,
2
page
Gently lay the system on its right side on a stable, nonslip surface.
3
Locate the HD to be removed.
4
Push the plastic latch in the direction of the engraved arrow (away from the metal locking
5
handle) until the HD handle pops out (see
38 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
The Sun Ultra 27 workstation accommodates up to four HDs. If you are not removing an
31.
"To Install a Hard Drive" on page
"To Power Off the Workstation"on page
"To Remove the Left-Side Access Panel"on

Figure

3–5).
40.
30.