Removing and Installing a PCIe2 x16 Card
If you are replacing the card, see
8
Install the back panel slot filler using the retaining screw.
9
Close the workstation and prepare for operation using the procedures in the section,
10
the Workstation and Preparing for Operation"on page 34
▼
To Install a PCIe2 x16 Card
Note –
specifications.
Power off the workstation using the procedure described in the section,
1
Workstation"on page
Remove the left-side access panel using the procedure described in the section,
2
Left-Side Access Panel"on page
58
Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
Removing a PCIe Graphics Card
FIGURE 3–18
See
"PCIe and PCI Expansion Slots" on page 108
30.
"To Install a PCIe2 x16 Card"on page
31.
58.
for PCIe slot locations and
"To Power Off the
"Closing
"To Remove the