Sun Microsystems Ultra 27 Service Manual page 63

Locate the 6–pin auxiliary power supply cable with the connector labeled To GFX Card or Splitter
1
and release the cable from the cable retainer.
If the splitter cable is attached to the connector, remove and retain the splitter.
2
Attach the 6–pin connector on the adapter cable to the 6–pin power supply cable.
3
Attach the 8–pin connector on the adapter cable to the 8–pin connector on the PCIe2 card.
4
Secure the cable in the cable retainer.
5
Chapter 3 • Maintaining the Workstation
Adding Supplemental Power to PCIe2 Cards
63