Removing a PCIe Card
FIGURE 3–20
Choose your next step:
7
If you are not replacing the PCIe card, replace the slot filler panel, close the workstation, and
■
prepare for service using the procedures in the section,
Preparing for Operation"on page
If you are replacing the card, follow the instructions in the section,
■
page
65.
▼
To Install a PCIe Card
Any 64-bit PCI cards that you install will run in 32-bit mode.
Note –
Chapter 3 • Maintaining the Workstation
"Closing the Workstation and
34.
Removing and Installing PCIe Cards
"To Install a PCIe Card"on
65