Supported Memory Configurations; Physical Specifications; Power Specifications; Sun Ultra 27 Workstation Physical Specifications - Sun Microsystems Ultra 27 Service Manual

Physical Specifications

■
■

Supported Memory Configurations

The following is a list of supported memory configurations for the Sun Ultra 27 workstation
workstation. Only these configurations are valid:
■
■
■
Physical Specifications
Table A–4
TABLE A–4
Specification
Width
Depth
Height
Weight (max with packaging)

Power Specifications

The maximum continuous power for the Sun Ultra 27 workstation is 530W.
Table
110 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
The DDR3 interface can support up to six DDR3–1066 DIMMs running at full speed.
Note –
DIMMs must be installed in groups of three (except the single DIMM configuration).
Populate DIMMs according to the supported memory configurations listed in the next
section.
One 1 GB DIMM in slot 1 (1 GB DIMM only)
DIMMs in slots 1, 3, 5 only (black-colored slots only)
All DIMM slots populated
lists the physical specifications for the Sun Ultra 27 workstation.

Sun Ultra 27 Workstation Physical Specifications

A–5, Table A–6, and
Inches/Pounds
7.9 in.
18.5 in.
17.1 in.
43.7 lb
Table A–7 list additional power specifications for the system.
Metric
200 mm
470 mm
435 mm
19.8 kg