Removing And Installing A Hard Drive - Sun Microsystems Ultra 27 Service Manual

TABLE 3–1
Description
Memory modules (DIMMs)
Hard drives
DVD-dual drive
4–port internal SAS adapter (LSI Logic 3041E)
Nvidia Quadro graphics accelerator cards
Fan and heat sink assembly for CPU
Power supply (530w)
System fan module
I/O assembly
HD backplane assembly
System cable kit
6–to-8 pin adapter cable (PCI auxiliary power adapter
cable)
System battery

Removing and Installing a Hard Drive

This section contains procedures to remove and replace a hard drive (HD). Terms used in this
section are defined as follows:
■
■
■
■
Chapter 3 • Maintaining the Workstation
CRU and FRU List
HD – A hard drive equipped with rails and a locking mechanism compatible with the HD
cage in the Sun Ultra 27 workstation.
HD cage – The metal assembly that holds the system HDs. The rails on the HDs fit into
guides on the HD cage. The HD cage is not replaceable, nor is it removed during
maintenance procedures.
Storage backplane – The storage backplane is located beneath the HD cage. When correctly
inserted into the HD cage, the HD makes contact with the connectors on the storage
backplane. The storage backplane also has cables linking it to the power supply and to
storage device connectors on the motherboard.
Hard drive assembly – Installed HDs, the HD cage, and the storage backplane.
(Continued)
Status
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
CRU
Removing and Installing a Hard Drive
37