To Access The Diagnostic Partition Under Red Hat Linux - Sun Microsystems Ultra 27 Service Manual

Create Diagnostic Partition Option
From the Tools and Drivers DVD main menu, choose 1 to run the Hardware Diagnostics software.
3
The Hardware Diagnostics menu appears.
From the Hardware Diagnostics main menu, choose Immediate Burn In Testing.
4
Select Load Burn In Script.
5
Do one of the following actions:
6
■
■
Select Perform Burn In Tests to run the script.
7
When the tests are complete, press the Escape key to exit the Display Results window.
8
Select Exit to DOS and press the Enter key.
9
At the DOS prompt, type the following:
10
C:> d:
Type the following to list the contents of the diagnostic partition.
11
D:> dir
The noinput.jrl log appears.
▼
To Access the Diagnostic Partition Under Red Hat
Linux
Remove the Tools and Drivers DVD from the DVD drive.
1
Reboot the workstation and start the Red Hat Linux OS.
2
Log in as superuser.
3
100 Sun Ultra 27 Workstation Service Manual • June 2009, Revision A
Type noinput.tst and press the Enter key.
If you are using a test you created yourself, type d:\testname.tst in the Load Burn In Script
field. where testname is the name of the test you created.