Use care when installing the bezel. The bezel tabs and the chassis hooks might break if
Caution –
you apply too much force or attempt to swing the bezel closed.
Installing the Front Bezel
FIGURE 3–3
▼
Install the Left-Side Access Panel
Install the left-side access panel after you finish inspecting or installing components.
If necessary, install the front bezel (see
1
Position the access panel so that the lip on the inside bottom of the panel fits over the bottom
2
chassis rail.
Chapter 3 • Maintaining the Workstation
Closing the Workstation and Preparing for Operation
"Install the Front Bezel"on page
34).
35