NETGEAR FVS318G Reference Manual page 84

The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > LAN Setup.
The LAN Setup screen displays.
3. In the upper right of the screen, select the IPv6 radio button.
4. Under the List of IPv6 Address Pools table, click the Add button.
5. Enter the settings as described in the following table:
Table 14. LAN IPv6 Config screen settings
Setting
Start IPv6 Address
End IPv6 Address
Prefix Length
6. Click the Apply button.
Your changes are saved.
To edit an IPv6 LAN address pool:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between this address and the end IP address.
Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCPv6 client joining the LAN is
assigned an IP address between the start IP address and this IP address.
Enter the IPv6 prefix length, for example, 10 or 64.
LAN Configuration
84