NETGEAR FVS318G Reference Manual page 218

4. To view the wizard default settings, in the upper right of the screen, click the VPN Wizard
default values option arrow.
5. Complete the settings as described in the following table:
Table 42. IPSec VPN Wizard settings for an IPv6 gateway-to-gateway tunnel
Setting
About VPN Wizard
This VPN tunnel will connect
to the following peers
Connection Name and Remote IP Type
What is the new Connection
Name?
What is the pre-shared key?
End Point Information
What is the Remote WAN's IP
Address or Internet Name?
What is the Local WAN's IP
Address or Internet Name?
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Select the Gateway radio button. The local WAN port's IP address or
Internet name displays in the End Point Information section.
Enter a descriptive name for the connection. This name is used to help you
to manage the VPN settings; the name is not supplied to the remote VPN
endpoint.
Enter a pre-shared key. The key must be entered both here and on the
remote VPN gateway. This key must be a minimum of 8 characters and
must not exceed 49 characters.
a
Enter the IPv6 address or Internet name (FQDN) of the WAN interface on
the remote VPN tunnel endpoint.
When you select the Gateway radio button in the About VPN Wizard
section, the IPv6 address of the VPN firewall's active WAN interface is
automatically entered.
218