NETGEAR FVS318G Reference Manual page 208

3. In the Add Port Triggering Rule section, enter the settings as described in the following table:
Table 40. Port Triggering screen settings
Setting
Name
Enable
Protocol
Outgoing Ports
Incoming Ports
4. Click the Add table button.
The new port triggering rule is added to the Port Triggering Rules table.
To edit a port triggering rule:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Port Triggering.
The Port Triggering screen displays.
3. In the Port Triggering Rules table to the right of the port triggering rule that you want to edit,
click the Edit table button.
The Edit Port Triggering Rule screen displays.
4. Modify the settings that you wish to change.
Table 40
See on page 208.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
A descriptive name of the rule for identification and management purposes.
From the list, select Yes to enable the rule. (You can define a rule but not enable it.)
The default setting is No.
From the list, select the protocol to which the rule applies:
• TCP. The rule applies to an application that uses the Transmission Control
Protocol (TCP).
• UDP. The rule applies to an application that uses the User Datagram Protocol
(UDP).
Start Port The start port (1–65535) of the range for triggering.
End Port The end port (1–65535) of the range for triggering.
Start Port The start port (1–65535) of the range for responding.
End Port The end port (1–65535) of the range for responding.
Firewall Protection
208