NETGEAR FVS318G Reference Manual page 46

Table 8. Broadband ISP Settings screen settings for a PPPoE IPv6 connection (continued)
Setting
DHCPv6 Option
Primary DNS Server
Secondary DNS Server If you selected Disable-DHCPv6 from the DHCPv6 Options list, the IPv6 IP
6. Click the Apply button.
Your changes are saved.
7. To verify the connection, click the Status option arrow in the upper right of the screen.
The Connection Status pop-up screen displays, which shows a static IP address
configuration; the screen for PPPoE is similar.)
The Connection Status screen shows a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see
ISP Connection
on page 389.
For more information about the Connection Status screen, see
on page 373.
If your ISP requires MAC authentication and another MAC address was previously
registered with your ISP, you must enter that address on the Broadband Advanced
Options screen for the corresponding WAN interface (see
Options and Other Tasks
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
From the DHCPv6 Option list, select one of the following DHCPv6 server
options, as directed by your ISP:
• Disable-DHCPv6. DHCPv6 is disabled. You must specify the DNS servers in
the Primary DNS Server and Secondary DNS Server fields to receive an IP
address from the ISP.
• DHCPv6 StatelessMode. The VPN firewall generates its own IP address by
using a combination of locally available information and router
advertisements but receives DNS server information from the ISP's DHCPv6
server. Router advertisements include a prefix that identifies the subnet that
is associated with the WAN port. The IP address is formed from a
combination of this prefix and the MAC address of the WAN port. The IP
address is a dynamic address.
• DHCPv6 StatefulMode. The VPN firewall obtains an interface address,
configuration information such as DNS server information, and other
parameters from the ISP's DHCPv6 server. The IP address is a dynamic
address.
• DHCPv6 Prefix Delegation. The VPN firewall obtains a prefix from the ISP's
DHCPv6 server through prefix delegation, for example, 2001:db8::/64. The
VPN firewall's own stateless DHCPv6 server can assign this prefix to its IPv6
LAN clients. For more information about prefix delegation, see
DHCPv6 Server with Prefix Delegation
If you selected Disable-DHCPv6 from the DHCPv6 Options list, the IPv6 IP
address of the ISP's primary DNS server.
address of the ISP's secondary DNS server.
on page 52).
IPv4 and IPv6 Internet and Broadband Settings
46
Stateless
on page 79.
Troubleshoot the
View the WAN Port Status
Configure Advanced WAN