2.
Select Network Configuration > QoS.
3.
To enable QoS, under Do you want to enable QoS, select the Yes radio button.
4.
To select the QoS type, next to QoS Type, select either the Rate Control or the Priority
radio button.
If Rate Control is selected as the the QoS type, then only rate control QoS profiles are
active.
If Priority is selected as the QoS type, then only priority QoS profiles are active.
5.
Under the List of QoS Profiles table, select the QoS profiles that you want to enable or
disable and click either the Enable button or the Disable button.
6.
Click the Apply button.
Your changes are saved.
To add a QoS profile:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select Network Configuration > QoS.
The QoS screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
LAN Configuration
121