Configure Groups - NETGEAR FVS318G Reference Manual

a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Users > Domains.
The Domains screen displays.
3. In the Action column of the List of Domains table, for the domain that you want to edit, click
the Edit table button.
The Edit Domains screen displays. This screen is similar to the Add Domains screen.
4. Modify the settings as described in
Name and Authentication Type fields.
5. Click the Apply button.
Your changes are saved.

Configure Groups

The use of groups simplifies the configuration of VPN policies when different restrictions and
access controls apply to different sets of users. It also simplifies the configuration of web
access exception rules. Like the default domain of the VPN firewall, the default group is also
named geardomain. The default group geardomain is assigned to the default domain
geardomain. You cannot delete the default domain geardomain, nor its associated default
group geardomain.
IPSec VPN and L2TP users do not belong to a domain and are not assigned to a group.
For information about LAN groups, see
on page 71.
IMPORTANT:
When you create a domain on the Domains screen (see
Domains
on page 287), a group with the same name as the new
domain is created automatically. You cannot delete such a group.
However, when you delete the domain with which it is associated,
the group is deleted automatically.
Manage Users, Authentication, and VPN Certificates
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 66
Manage IPv4 Groups and Hosts (IPv4 LAN Groups)
292
on page 289. You cannot modify the Domain
Create