NETGEAR FVS318G Reference Manual page 65

NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 11. Add VLAN Profile screen settings (continued)
Setting Description
Enable DHCP Server Select the Enable DHCP Server radio button to enable the VPN firewall to
function as a Dynamic Host Configuration Protocol (DHCP) server, providing
TCP/IP configuration for all computers connected to the VLAN. (For the default
VLAN, the DHCP server is enabled by default.) Enter the following settings:
Domain Name
Start IP
End IP
Primary DNS
Server
Secondary DNS
Server
WINS Server
Lease Time
DHCP Relay To use the VPN firewall as a DHCP relay agent for a DHCP server somewhere
else in your network, select the DHCP Relay radio button. Enter the following
setting:
Relay Gateway
This setting is optional. Enter the domain name of the VPN
firewall.
Enter the start IP address. This address specifies the first of
the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between this address and the end IP address. For the default
VLAN, the default start IP address is 192.168.1.100.
Enter the end IP address. This address specifies the last of
the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between the start IP address and this IP address. For the
default VLAN, the default end IP address is 192.168.1.254.
The start and end DHCP IP addresses must be in the same
network as the LAN IP address of the VPN firewall (that is, the
IP address in the IP Setup section as described earlier in this
table).
This setting is optional. If an IP address is specified, the VPN
firewall provides this address as the primary DNS server IP
address. If no address is specified, the VPN firewall uses the
VLAN IP address as the primary DNS server IP address.
This setting is optional. If an IP address is specified, the VPN
firewall provides this address as the secondary DNS server IP
address.
This setting is optional. Enter a WINS server IP address to
specify the Windows NetBIOS server if one is present in your
network.
Enter a lease time. This specifies the duration for which IP
addresses are leased to clients.
The IP address of the DHCP server for which the VPN firewall
serves as a relay.
LAN Configuration
65