NETGEAR FVS318G Reference Manual page 371

The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > Connection Status.
The policy name, the endpoint's IP address, the amount of data and number of packets
transmitted, and the state of the connection are listed in the table.
3. To activate a tunnel, to the right of the policy's table entry, click the Connect table button.
4. To disconnect an active connection, to the right of the policy's table entry, click the
Disconnect table button.
To view the active L2TP tunnel users:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > Connection Status > L2TP Active Users.
The active user name, client's IP address on the remote LAC, and IP address that is
assigned by the L2TP server on the VPN firewall are listed in the table.
3. To disconnect an active user, to the right of the user's table entry, click the Disconnect table
button.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Monitor System Access and Performance
371