NETGEAR FVS318G Reference Manual page 145

2. Select Security > Firewall > DMZ WAN Rules.
3. To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Allows you to change the definition of an existing rule. Depending on your
selection, one of the following screens displays:
- Edit DMZ WAN Outbound Service screen for IPv4
- Edit DMZ WAN Inbound Service screen for IPv4
4. Click the Apply button.
Your changes are saved.
To access the DMZ WAN Rules screen for IPv6 or to change existing IPv6 rules:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Firewall Protection
145