NETGEAR FVS318G Reference Manual page 378

• Group. Each computer or device can be assigned to a single LAN group. By default,
a computer or device is assigned to Group 1. You can select a different LAN group
from the Group list in the Add Known PCs and Devices section or on the Edit Groups
and Hosts screen.
• Action. The Edit table button, which provides access to the Edit Groups and Hosts
screen.
View the DHCP Log
To review the most recent entries in the DHCP log:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
Select Network Configuration > LAN Setup.
2.
The LAN Setup screen displays the IPv4 settings.
3. Click the DHCP Log option arrow to the right of the LAN Setup tab.
To view the most recent entries, click the Refresh Log button.
To delete all the existing log entries, click the Clear Log button.
4. To modify the DHCP settings, click the LAN Setup option arrow.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Monitor System Access and Performance
378