NETGEAR FVS318G Reference Manual page 119

To edit an IPv6 static route:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > Routing.
The Static Routing screen displays.
3. Select the IPv6 radio button.
4. In the Action column for the route that you want to modify, click the Edit button.
The Edit IPv6 Static Routing screen displays. This screen is identical to the Add IPv6
Static Routing screen.
5. Modify the settings as described in
6. Click the Apply button.
Your changes are saved.
To delete one or more routes:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > Routing.
The Static Routing screen displays.
3. Select the IPv6 radio button.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 26
on page 118.
LAN Configuration
119