NETGEAR FVS318G Reference Manual page 271

7. Click the Advanced tab in the Authentication pane.
8. Specify the settings that are described in the following table.
Table 59. VPN client advanced authentication settings (Mode Config)
Setting
Advanced features
Mode Config
Aggressive Mode
NAT-T
Local and Remote ID
Local ID
Remote ID
9. To use the new settings immediately, click the Apply button.
10. To keep the settings for future use, click the Save button.
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Select this check box to enable Mode Config.
Select this check box to enable aggressive mode as the mode of negotiation with
the VPN firewall.
Select Automatic from the list to enable the VPN client and VPN firewall to
negotiate NAT-T.
As the type of ID, select DNS from the Local ID list because you specified FQDN
in the VPN firewall configuration.
As the value of the ID, enter client.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client.
As the type of ID, select DNS from the Remote ID list because you specified an
FQDN in the VPN firewall configuration.
As the value of the ID, enter router.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client.
271