NETGEAR FVS318G Reference Manual page 140

The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Firewall.
The LAN WAN Rules screen displays.
3. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button.
The screen displays the IPv6 settings.
4. Click the Add table button under the Outbound Services table.
5. Enter the settings as described in
Service, Action, and Log lists, you must make selections from the following lists:
• LAN Users
• WAN Users
Unless your selection from the Action list is BLOCK always, you also must make a
selection from the following lists:
• Select Schedule
• QoS Priority
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 29
on page 128. In addition to selections from the
Firewall Protection
140