NETGEAR FVS318G Reference Manual page 272

Create the Mode Config IPSec Configuration (Phase 2 Settings)
On the VPN firewall, the IPSec configuration (phase 2 settings) is referred to as the IKE
settings.
To create an IPSec configuration:

1. Right-click the VPN client icon in your Windows system tray, and select Configuration
Panel.
The Configuration Panel screen displays.
2. In the tree list pane of the Configuration Panel screen, right-click the GW_ModeConfig
authentication phase name, and select New Phase 2.
3. Change the name of the IPSec configuration (the default is Tunnel):
a. Right-click the IPSec configuration name.
b. Select Rename.
c. Type Tunnel_ModeConfig.
d. Click anywhere in the tree list pane.
This is the name for the IPSec configuration that is used only for the VPN client, not
during IPSec negotiation. You can view and change this name in the tree list pane. This
name must be a unique name.
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
272