NETGEAR FVS318G Reference Manual page 160

Unless your selection from the Action list is BLOCK always, you also must make a
selection from the Select Schedule list.
5. Click the Apply button.
Your changes are saved.
IPv6 LAN DMZ Inbound Service Rules
To create an IPv6 LAN DMZ inbound rule:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Firewall > LAN DMZ Rules.
The LAN DMZ Rules screen displays. Select the IPv6 radio button. The screen displays
the IPv6 settings.
3. Click the Add table button under the Inbound Services table.
4. Enter the settings as described in
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 30
on page 131.
Firewall Protection
160