NETGEAR FVS318G Reference Manual page 70

a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
d. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > LAN Setup > LAN Multi-homing.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the VPN firewall.
3. In the Add Secondary LAN IP Address section, enter the following settings:
• IP Address. Enter the secondary address that you want to assign to the LAN ports.
• Subnet Mask. Enter the subnet mask for the secondary IP address.
4. To add the secondary IP address to the Available Secondary LAN IPs table, in the rightmost
column, click the Add table button.
Step 3
5. Repeat
Available Secondary LAN IPs table.
To edit a secondary LAN IP address:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Step 4
and for each secondary IP address that you want to add to the
LAN Configuration
70