Log In To The Vpn Firewall - NETGEAR FVS318G Reference Manual

Log In to the VPN Firewall

Note: To connect the VPN firewall physically to your network, connect the
cables and restart your network according to the instructions in the
NETGEAR ProSAFE VPN Firewall FVS318G v2 Installation Guide.
To configure the VPN firewall, you must use a web browser such as Microsoft Internet
Explorer 7.0 or later, Mozilla Firefox 4.0 or later, or Apple Safari 3.0 or later with JavaScript,
cookies, and SSL enabled.
To log in to the VPN firewall:

1. Open any of the qualified web browsers.
2. In the address field, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
The VPN firewall factory default IP address is 192.168.1.1. If you change the IP address,
you must use the IP address that you assigned to the VPN firewall to log in to the VPN
firewall.
3. In the Username field, enter admin.
Use lowercase letters.
4. In the Password / Passcode field, enter password.
Use lowercase letters.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Introduction
19