NETGEAR FVS318G Reference Manual page 139

3. Click the Add table button under the Outbound Services table.
4. Enter the settings as described in
In addition to selections from the Service, Action, and Log lists, you must make
selections from the following lists:
• LAN Users
• WAN Users
Unless your selection from the Action list is BLOCK always, you also must make
selections from the following lists:
• Select Schedule
• QoS Priority
• Bandwidth Profile
• NAT IP (This ist is available only when the WAN mode is NAT. If you select Single
Address, the IP address specified must fall under the WAN subnet.)
5. Click the Apply button.
Your changes are saved.
IPv6 LAN WAN Outbound Rules
To create an IPv6 LAN WAN outbound rule:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 29
on page 128.
Firewall Protection
139