NETGEAR FVS318G Reference Manual page 163

following figure). In the example, CU-SeeMe connections are allowed only from a specified
range of external IP addresses.
Figure 11. Example of inbound firewall rule
IPv4 LAN WAN or IPv4 DMZ WAN Inbound Rule: Set Up One-to-One NAT
Mapping
In this example, multi-NAT is configured to support multiple public IP addresses on one WAN
interface. An inbound rule configures the VPN firewall to host an additional public IP address
and associate this address with a web server on the LAN.
The following addressing scheme is used to illustrate this procedure:
• NETGEAR VPN firewall:
- WAN IP address. 10.1.0.118
- LAN IP address subnet. 192.168.1.1 with subnet 255.255.255.0
- DMZ IP address subnet. 192.168.10.1 with subnet 255.255.255.0
• Web server computer on the VPN firewall's LAN:
- LAN IP address. 192.168.1.2
- DMZ IP address. 192.168.10.2
NETGEAR ProSAFE VPN Firewall FVS318G v2
Firewall Protection
163