NETGEAR FVS318G Reference Manual page 375

Table 84. Connection Status screen information for an IPv4 connection (continued)
Item
IP Address
Subnet Mask
Gateway
DNS Server
DHCP Server
Lease Obtained
Lease Duration
To establish the connection, click the Connect button.
To disconnect the connection, click the Disconnect button.
IPv6 WAN Port Status
To view the IPv6 status of the WAN port:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > WAN Settings > Broadband ISP Settings (IPv6).
The Broadband ISP Settings (IPv6) screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
The addresses that were automatically detected or that you configured on the
Broadband ISP Settings (IPv4) screen.
Note: For more information, see
Configure an IPv4 Internet Connection
Internet Connection
on page 31.
DHCP only. The DHCP server that was automatically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You configured these ISP settings on the Broadband ISP Settings
screen.
Note: For more information, see
Configure an IPv4 Internet Connection
Internet Connection
on page 31.
DHCP only. The time when the DHCP lease was obtained.
DHCP only. The period that the DHCP lease remains in effect.
Monitor System Access and Performance
375
Let the VPN Firewall Automatically Detect and
Manually Configure an IPv4
on page 28 and
Let the VPN Firewall Automatically Detect and
Manually Configure an IPv4
on page 28 and