Modify Or Delete A Mode Config Record - NETGEAR FVS318G Reference Manual
Vpn firewall
Hide thumbs
Also See for FVS318G:
- Reference manual (180 pages) ,
- Datasheet (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
When the tunnel opens successfully, the Tunnel opened message displays above the
system tray, and the VPN client displays a green icon in the system tray.
2.
Verify that the VPN firewall issued an IP address to the VPN client.
This IP address displays in the VPN Client address field on the IPSec pane of the VPN
client.
3.
From the client computer, ping a computer on the VPN firewall LAN.
Modify or Delete a Mode Config Record
Note:
Before you modify or delete a Mode Config record, make sure that it is
not used in an IKE policy.
To edit a Mode Config record:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
275
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
