NETGEAR FVS318G Reference Manual page 282

with geardomain.) For information about how to create L2TP user accounts, see
User Accounts
on page 295.
To enable the L2TP server and configure the L2TP server pool:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > L2TP Server.
3. To enable the L2TP server, select the Enable check box.
4. Enter the settings as described in the following table.
Table 63. L2TP Server screen settings
Setting
L2TP Server Configuration
Starting IP Address
Ending IP Address
Idle Timeout
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
The first IP address of the pool. This address is used for distribution to the VPN
firewall.
The last IP address of the pool. A maximum of 26 contiguous addresses is
supported. (The first address of the pool cannot be assigned to a user.)
The period after which an idle user is automatically logged out of the L2TP server.
The default idle time-out period is 10 minutes.
282
Configure