NETGEAR FVS318G Reference Manual page 248

VPN Policies
You can add additional policies—either Auto or Manual—and manage the VPN policies that
were already created. You can edit policies, enable or disable policies, or delete them
entirely. These are the rules for VPN policy use:
• Traffic covered by a policy is automatically sent through a VPN tunnel.
• When traffic is covered by two or more policies, the first matching policy is used. (In this
situation, the order of the policies is important. However, if you use only one policy for
each remote VPN endpoint, the policy order is not important.)
• The VPN tunnel is created according to the settings in the security association (SA).
• The remote VPN endpoint must use a matching SA; otherwise, it refuses the connection.
To view the VPN policies:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > IPSec VPN > VPN Policies.
In the upper right of the screen, the IPv4 radio button is selected by default. The VPN
Policies screen displays the IPv4 settings.
3. To display the IPv6 settings on the IKE Policies screen, select the IPv6 radio button.
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
248