NETGEAR FVS318G Reference Manual page 29

2. Select Network Configuration > WAN Settings > Broadband ISP Settings.
In the upper right of the screen, the IPv4 radio button is selected by default. The ISP
Broadband Settings screen displays the IPv4 settings.
3. Click the Auto Detect button at the bottom of the screen.
The autodetect process probes the WAN port for a range of connection methods and
suggests one that your ISP is most likely to support.
The autodetect process returns one of the following results:
• If the autodetect process is successful, a status bar at the top of the screen displays
the results (for example, DHCP service detected).
NETGEAR ProSAFE VPN Firewall FVS318G v2
IPv4 and IPv6 Internet and Broadband Settings
29