Configure A Pppoe Ipv6 Internet Connection - NETGEAR FVS318G Reference Manual

7. To verify the connection, click the Status option arrow in the upper right of the screen.
The Connection Status screen shows a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see
ISP Connection
For more information about the Connection Status screen, see
on page 373.
If your ISP requires MAC authentication and another MAC address was previously
registered with your ISP, you must enter that address on the Broadband Advanced
Options screen for the corresponding WAN interface (see
Options and Other Tasks

Configure a PPPoE IPv6 Internet Connection

To configure a PPPoE IPv6 Internet connection, you must enter the PPPoE IPv6 information
that you received from your ISP.
To configure PPPoE IPv6 broadband ISP settings:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > WAN Settings > Broadband ISP Settings.
The Broadband ISP Settings screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
on page 389.
on page 52).
IPv4 and IPv6 Internet and Broadband Settings
Configure Advanced WAN
44
Troubleshoot the
View the WAN Port Status