Configure Keep-Alives And Dead Peer Detection - NETGEAR FVS318G Reference Manual

b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > IPSec VPN > Mode Config.
The Mode Config screen displays.
3. In the Action column for the record that you want to modify, click the Edit button.
The Edit Mode Config Record screen displays. This screen is identical to the Add Mode
Config Record screen.
4. Modify the settings as described in
5. Click the Apply button.
Your changes are saved.
To delete one or more Mode Config records:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select VPN > IPSec VPN > Mode Config.
The Mode Config screen displays.
3. Select the check box to the left of each record that you want to delete or click the Select All
table button to select all records.
4. Click the Delete table button.

Configure Keep-Alives and Dead Peer Detection

In some cases, you might not want a VPN tunnel to be disconnected when traffic is idle, for
example, when client-server applications over the tunnel cannot tolerate the tunnel
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 56
276
on page 263.