Power On; Setting Audio Volume; Setting Date/Time; Local Setting - Icom ID-51A Basic Instructions

2
STARTING INITIAL SETUP

■ Power ON

Hold down [ ] for 1 second to turn ON power.
➥
• After the opening message and power source voltage are dis-
played, the operating frequency appears.
• Hold down [ ] for 1 second to turn OFF power.
The opening message and power source voltage display
options can be turned ON or OFF in the Display menu.
MENU > Display > Opening Message (p. 28)
MENU > Display > Voltage (Power ON) (p. 28)

■ Setting audio volume

Rotate [VOL] to adjust the audio level.
➥
• If the squelch is closed, hold down [SQL] while setting the audio
level.
• The display shows the volume level while adjusting.
The beep level is adjusted in the Sounds menu.
MENU > Sounds > Beep Level (p. 29)
11
[VOL]
[ ]

■ Setting Date/Time

The ID-51A/E has a built-in internal GPS receiver, and has a
time correction function. The transceiver automatically sets
the Date/Time settings to your local time.
D Local setting
Push [MENU] .
q
Push D-pad( ) to select the
w
root item "Time Set," and then
push D-pad(Ent).
• If the item is not displayed, push
D-pad() one or more times to
select the page.
D-pad
(Ent)
(�)
Push D-pad( ) to select
e
"UTC Offset," and then push
D-pad(Ent).
Push D-pad( ) to set to your
r
local offset time.
(Example: –8:00)
Push [MENU] to exit the
t
Menu screen.
The "GPS Time Correct" item in the Time Set menu is set
to "Auto" as the default setting.
MENU > Time Set > GPS Time Correct (p. 29)