Basic Configuration Of Basic Unit With Setup Tool - BinTec X4100 User Manual

6 Basic Configuration of Basic Unit
with Setup Tool
This chapter tells you how to carry out the basic configuration steps for taking
your X4100/200/300 basic unit into operation using the Setup Tool.
This chapter is broken down as follows:
Basic Router Settings
This chapter describes the steps you must always carry out for taking
X4100/200/300 into operation, irrespective of the environment or applica-
tions for which you use X4100/200/300.
– Where do we go from here?
This chapter tells you what to do next after you have completed the ba-
sic router settings.
Configuring the WAN Interfaces
Description of how to configure the WAN interfaces integrated in the
X4100/200/300 basic unit.
Configuration of WAN Partners
Tells you how to configure your WAN partners.
Saving the Configuration
Describes how to save your configuration.
Configuring Communication Applications for CAPI on your PC
page 171)
Testing your Configuration
How to test your configuration.
(chapter 6.1, page 100)
(chapter 6.1.6, page
(chapter 6.2, page
(chapter 6.3, page
(chapter 6.4, page 170)
(chapter 6.6, page
X4100/200/300 User's Guide
117)
119)
142).
(chapter 6.5,
172)
6
99