Testing Your Configuration - BinTec X4100 User Manual

6
Basic Configuration of Basic Unit with Setup Tool
Testing the LAN
connection
Testing Internet access
172 BinTec Access Networks GmbH
6.6

Testing your Configuration

Now let's make sure everything works.
Caution!
Incorrect configuration of the devices in your LAN may result in unintended con-
nections and increased charges! Monitor your
that the system does not establish unwanted ISDN connections (and charges).
To avoid unnecessary charges, check whether the filters set in
chapter 6.1.5, page 113
ure more filters with the Setup Tool
Watch the LEDs on your
monitor function of the Setup Tool (cf.
settings in the display (cf.
an SNMP Management Tool.
Test the connection to your X4100/200/300:
In the start menu of your PC, click Run and enter ping, followed by a space
and the IP address of X4100/200/300, e.g. ping 192.168.1.254. If the
configuration is correct, a window opens to indicate "Answer
192.168.1.254...".
Test the Internet access by entering
er.
If the configuration is correct, BinTec's start page opens. BinTec's Internet
site offers you the latest news, updates and documentation.
X4100/200/300
are sufficient for your needs. If not, you can config-
(chapter 9.2.8, page
X4100/200/300 (cf. chapter 3.5, page
chapter 9.1, page
chapter 5, page 81) or check your settings with
www.bintec.net
and make sure
319).
48), use the
294), call up your
from
in the Internet brows-