Scope Of Supply; Basic Unit; Expansion Cards - BinTec X4100 User Manual

1
Welcome!
16 BinTec Access Networks GmbH
1.2

Scope of Supply

This chapter describes the scope of supply for the basic units and expansion
cards.
1.2.1

Basic Unit

The X4100/200/300 basic unit is designed for mounting in a 19-inch rack. The
X4100/200/300 basic unit is supplied with the following parts:
Cable sets
– Serial cable for the console port
– IEC AC power cord
– ISDN cable
BinTec Companion CD
Documentation
– User's Guide
– Release Notes, if required
19-inch mounting kit
1.2.2

Expansion Cards

The following expansion cards can be purchased for X4100/200/300:
X4E-1/2PRI: WAN interface card for ISDN PRI and/or G.703
– equipped as standard with hardware support (HiFn) for encryption and
compression
– can be optionally equipped with up to two resource cards (XT-S, XT-M,
XT-2M, XT-L) with maximum 30 digital modems.
X4E-2/3BRI: WAN interface card for ISDN BRI, can be optionally equipped
with
– a resource card with digital modems (XT-S, XT-M) and/or
– a resource card for encryption and compression (XT-ENC)