Saving The Configuration - BinTec X4100 User Manual

6
Basic Configuration of Basic Unit with Setup Tool
170 BinTec Access Networks GmbH
6.4

Saving the Configuration

After creating a configuration on your X4100/200/300, make sure you save it:
From the Setup Tool main menu, select Exit and press Return.
Another menu window opens:
X4x00 Setup Tool
[EXIT]: Exit Setup
Back to Main Menu
Save as boot configuration and exit
Exit without saving
You have three alternatives:
Select Back to Main Menu to return to the Setup Tool main menu.
Select Save as boot configuration and exit to save the configuration data
as "boot" file in the flash memory.
The SNMP shell of
the changes you have just made with the Setup Tool are saved in the flash.
The next time you start your X4100/200/300, the configuration file you have
just saved will be loaded.
Select Exit without saving to quit the Setup Tool without saving your
changes in the flash.
The SNMP shell of
settings or changes you have made with the Setup Tool will be lost when
you turn off your X4100/200/300.
BinTec Access Networks GmbH
X4100/200/300 opens with the command prompt. All
X4100/200/300 opens with the command prompt. All
MyRouter