Basic Unit; Front Panel Of Basic Unit - BinTec X4100 User Manual

3
Hardware Description and Installation
Display and input keys
32 BinTec Access Networks GmbH
3.1

Basic Unit

The X4100/200/300 basic unit can be installed in a 19-inch cabinet using brack-
ets (see chapter 3.2, page
The X4100/200/300 basic unit is not fitted with an expansion card in the ex
works state. The expansion slot provided for the expansion card at the rear of
the equipment is closed by a dummy cover. This dummy cover is unscrewed
when the expansion card is fitted. The slot is automatically covered by the back-
plane of the expansion card when the card is fitted.
3.1.1

Front Panel of Basic Unit

The front panels of the X4100,
cept for the equipment designation:
1 Display with input keys (MMI)
Figure 3-1: Front view of basic unit
BinTec's Man-Machine Interface (MMI), a convenient user guide with display
and input keys, guides the user through a number of basic functions of
200/300. You will find a detailed description of the MMI in
36).
X4200 and X4300 basic units are identical – ex-
X4100/
chapter 5, page 81.