9
Configuration of Security Functions
To do
User concept
Filters
314
BinTec Access Networks GmbH
Proceed as follows to activate a Closed User Group for a WAN partner:
Go to WAN P
ARTNER
S
.
ETTINGS
Select Closed User Group: specify .
Enter the CUG index.
You can obtain information about CUGs from your telephone provider.
Confirm with OK.
9.2.6
Access to Remote CAPI
The special features offered by BinTec routers include implementation of the
Remote CAPI
and for PABXs the Remote TAPI programming interfaces.
This enables applications on computers in the LAN to use the resources of the
router as if these components were installed directly in the computer.
By using BinTec's user concept, you can make sure that only users authenticat-
ed by user name and password can access X4100/200/300's Remote CAPI in-
terface (see
figure 6-3, page
You can also prevent unauthorized access by defining filters (see
page
319) and local filters (see
9.2.7
NAT (Network Address Translation)
NAT
is a simple-to-operate procedure that can be used for several pur-
poses in the BinTec implementation:
Hiding the internal host addresses of a LAN by remapping to one or more
external addresses.
Controlling external to internal access. In the external direction, the router
forwards all
data packets
nal callers are only allowed if explicitly enabled.
E
WAN N
DIT
UMBERS
124).
chapter 9.2.9, page
331).
(forward NAT) and connections from exter-
E
A
DIT
DVANCED
chapter 9.2.8,