Resource Card For Encryption And Compression - BinTec X4100 User Manual

Bintec extendible multiprotocol router user's guide
Hide thumbs Also See for X4100:
Table of Contents

Advertisement

8
Configuration of Expansion and Resource Cards with the Setup Tool
Configuration with the
Setup Tool
292
BinTec Access Networks GmbH
8.5
Resource Card for Encryption and
Compression
The ISDN PRI and G.703 expansion card is supplied ex works with hardware
support for encryption and compression. The ISDN BRI expansion card and the
LAN expansion card can be optionally equipped with a suitable resource card.
A resource card for encryption and compression supports STAC compression
and symmetric encryption processes (DES, 3DES, CAST, Blowfish). This en-
ables the available bandwidth to be fully utilized and connections costs cut,
without affecting the performance of X4100/200/300.
Caution!
The installation of the PRI/G.703 expansion card or the installation of resource
cards in an expansion card generates additional heat. A fan unit must be used
to prevent damage to components!
If you use a PRI/G.703 expansion card or an expansion card with resource
card(s) in your built-in
You can buy the fan unit from your supplier.
STAC compression and encryption are configured in the Setup Tool menu WAN
P
EDIT (see
ARTNER
X4100/200/300
unit, make sure you use the fan unit.
chapter 7.2.10, page 213
and
chapter 9.3.1, page
342).

Advertisement

Table of Contents
loading

This manual is also suitable for:

X4300X4200

Table of Contents