Defining Default Screen; Saving The Configuration - BinTec X4100 User Manual

Menus and Settings
5.3.7

Defining Default Screen

In the default setting, the logo is displayed on the screen when the idle timer ex-
pires. If you want to use another MMI menu as default screen, proceed as fol-
lows:
Use the input keys to indicate the desired menu.
Keep the C key pressed for three seconds.
The MMI displays the following text:
New default screen
has been selected
Figure 5-10: New menu selected as default screen
Confirm with OK.
The selected menu is shown and used as default screen.
5.3.8

Saving the Configuration

Proceed as follows to save the current configuration of
the input keys:
Keep the OK key pressed for three seconds.
The MMI displays the following text:
Do you want
to save the current
configuration?
Figure 5-11: Saving configuration via MMI
Press OK.
X4100/200/300 User's Guide
5
X4100/200/300 using
95