Tei (Terminal Endpoint Identifier) - BinTec X4100 User Manual

7
Advanced Configuration of Basic Unit with the Setup Tool
182 BinTec Access Networks GmbH
7.1.4 X.31 TEI (Terminal Endpoint Identifier)
The menu CM-1BRI, ISDN S0
X.31 TEI (X.25 in the D-channel). You only need to make changes here if you
want to use the X.31 TEI value, e.g. for CAPI applications.
The menu contains the following fields:
Field
X.31 TEI Value
Specify TEI Value
X.31 TEI Service
CM-1BRI, ISDN S0
Table 7-7:
A S
DVANCED ETTINGS
Meaning
X.31 TEI is detected automatically in ISDN
autoconfiguration and this value set to specify .
If autoconfiguration has not detected TEI, you
can set specify manually.
The value for X.31 TEI assigned by the
exchange.
This value is detected automatically by ISDN
autoconfiguration, but can also be entered
manually.
Here you select the service for which you want
to use X.31 TEI. Possible values:
Capi
Capi Default
Packet Switch
Capi and Capi Default are for using X.31 TEI
for CAPI applications. For CAPI , the TEI value
set in the CAPI application is used. For CAPI
Default , the value of the CAPI application is
ignored and the default value set here is always
used.
Set to Packet Switch if you want to use X.31
TEI for the X.25 router.
A S
DVANCED ETTINGS
contains settings for