Wan Interface Card For Isdn Bri - BinTec X4100 User Manual

8
Configuration of Expansion and Resource Cards with the Setup Tool
Setup Tool with
additional interfaces
272 BinTec Access Networks GmbH
8.1

WAN Interface Card for ISDN BRI

By installing a Basic Rate Interface expansion card, you can equip
300 with up to three additional ISDN BRI interfaces. You can use these interfac-
es for both dialup and leased lines over ISDN.
The ISDN BRI expansion card can be equipped with a resource card with digital
modems (see chapter 8.4, page
and compression (see chapter 8.5, page
The additional interfaces are shown as follows in the Setup Tool main menu un-
der Module:
X4x00 Setup Tool
Licenses
LAN: CM-100BT,Fast Ethernet
WAN: CM-1BRI,ISDN S0
Serial WAN: CM-SERIAL, Serial
WAN partner
IP PPP ISDN
Configuration Management
Monitoring and Debugging
Exit
The interface(s) are configured in the following menus:
X4E-3BRI, ISDN S0
X4E-3BRI, ISDN S0
X4E-3BRI, ISDN S0
The number of ISDN BRI ports available with the expansion card can vary,
depending on how many interfaces are activated by license. You can obtain
any necessary licenses from your dealer.
283) and/or with a resource card for encryption
292).
BinTec Access Networks GmbH
System
Module: X4E-3BRI,ISDN S0
Resources:
CAPI QoS
U 0 for the first additional ISDN BRI port
NIT
U 1 for the second additional ISDN BRI port
NIT
U 2 for the third additional ISDN BRI port
NIT
X4100/200/
MyRouter